Fix your IMEI, WiFi & Completly Restore your iPhone

Tình cờ đi tìm đáp án cho những giải pháp này, có lượm dc 1 bài viết của mấy tay nước ngoài hướng dẫn về fix IMEI và WIFI sau khi restore/update do lỗi phần mềm, đây là hướng dẫn = Tiếng Anh, bạn nào rành tiếng Anh thì dịch dùm nhé ! Mình dịch dc mà ko có thời gian

Well guys, I know you waited a long time for this guide so here it is.

I"m sorry it took me so long to post this guide up, but I was just soo busy with school, term papers, and plus I had some serious back problems a couple of weeks ago that I"m still recovering from. So I hope that this guide can bring your iPhone back to life, and remember, I"m on AIM almost every day during this time, so feel free to IM me and ask questions.

Also, I"d appreciate if you would Donate if my guide helps you out. You can donate to: gamezilla@gmail.com via PayPal
I really appreciate all your donations.

And now, take a deep breath, and get ready to repair your iPhone!

THIS GUIDE WAS WRITTEN FOR WINDOWS XP USERS, BUT FEEL FREE TO KEEP READING IF YOU HAVE A MAC

Step 1: We will ONLY be working with 2 firmware files here, they are 1.0.2 and 1.1.2

Download these 2 firmware files even if you already have them, as the ones you might have could be corrupt. Also download my iPhone Restore Package. And make sure you have iTunes 7.5 installed, if not, then now would be a good time to go ahead to www.itunes.com and install it.

Firmware 1.0.2:
http://appldnld.apple.com.edgesuite....8_Restore.ipsw

Firmware 1.1.2:
http://appldnld.apple.com.edgesuite....b_Restore.ipsw

iPhone Restore Package:
http://rapidshare.com/files/75053525...ckage.rar.html

Step 2: Connect your iPhone to your computer and open up iTunes. By now I expect all of you to know how to properly DFU Restore, and when I say properly I dont mean using the 10 second rule, I mean you acutally gotta listen to the sound your computer makes when a USB device is connected/disconnected.
Now no matter what iTunes says about your iPhone, ignore it. DFU Restore to 1.1.2

Step 3: Now once your iPhone has been restored to 1.1.2, DFU Restore to 1.0.2, after thats complete, you will get an error 1013. Thats perfectly normal. Now DFU Restore AGAIN to 1.0.2, and again you will get the same error.

Step 4: After thats done, close iTunes and open up AppTappInstaller.exe from my iPhone Restore Package. Select firmware 1.02 and hit next. This will basically get your iPhone out of Restore Mode and AppTappInstaller will give you an error which is perfectly normal.

Step 5: Open up iTunes and ignore any messages you get, and now open up wiNstallerGUI thats in the iPhone Restore Package. Hit the Activate button and let the process complete. Once its finished you may close it.

Step 6: Open up iBrickr and click on Applications, then click on the Install PXL button. Follow all the instructions carefully inorder to install PXL. Once Done, Click on Applications again, and now you will have a huge selection of applications you can install on your iPhone. What you need to find is, BSD SubSystems 1.5, and Mobile Terminal vt100.

Step 7: Once those apps are installed on your iPhone, turn off the phone, and turn it back on. Now go to settings, and set Autolock to NEVER.

Step 8: Open up iBrickr again and this time click on Files. You will now see a picture of an iPhone with a whole bunch of directories on the screen. You are now going to navigate to the /usr/bin directory. Do this by clicking on the usr/ link, and then click on the bin/ link. Once you"re there, you will now upload the files that are in the BB Downgrade folder thats in the iPhone Restore Package. You MUST upload each file ONE BY ONE.

Step 9: Now you need to browse back to the root of the iPhone in iBrickr by using the Up link, keep clicking it until you see the Applications link. Click on Applications, then to the left, click on the button Create Folder, name this folder anySIM.app (make sure its EXACTLY like that). Next you are going to upload all the files that are in the (1.02)anySIM.app folder, also one by one. Once finished, simply close iBrickr and restart your iPhone.

Step 10: Once you turn on your iPhone, go to Mobile Terminal and type in the following commands exactly as you see them, and press return after each command:

cd /usr/bin

launchctl unload -w /System/Library/LaunchDaemons/com.apple.CommCenter.plist

chmod +x bbupdater

bbupdater -v
(this should tell you that your BB is 4.02)

chmod +x ieraser

ieraser
(when you run this command, give it a minute to complete)

bbupdater -v
(now when you check your BB again, it should say something about failing to ping the baseband)

bbupdater -e ICE03.14.08_G.eep -f ICE03.14.08_G.fls
(Press return only ONCE. This is the command that flashes an older version of the BB back to your iPhone. This process will take a few minutes, so wait for it to fully complete)

bbupdater -v
(This time it will display the older 3.14 BB)

launchctl load -w /System/Library/LaunchDaemons/com.apple.CommCenter.plist

After the final command is completed, you may now safely hit the Home button to return to springboard. And now just restart your iPhone.

Step 11: Start up the anySIM application thats on your springboard. Slide the red slider, and then scroll down and hit the Agree button. Wait for the process to fully complete. Once done, restart your iPhone again, and now go into settings and check out your IMEI #

Step 12: Go to settings, and setup your WiFi connection. Now go to Installer on your iPhone, and add the following source:
http://markmon.mine.nu:90/iphone/repo/repo.plist

Make sure you triple check it before pressing ok as the iPhone tends to auto correct things. Hit the refresh button a few times. The source should now say BigBoss. Now hit the install button the the bottom, and scroll down to the "Unlock That iPhone" category. Now scroll down and install Virginize Scripts. After its installed hit the Home button to return to springboard.

Step 13: Go back into Mobile Terminal, and type the following commands, hitting return after each one:

cd /usr/bin

virginize
(this is the command that will now make your iPhone a complete Virgin)

Step 14: Now DFU Restore your iPhone to Firmware 1.02. Once this is complete, your phone will be completly Virginized, meaning it will be LOCKED.

Step 15: Now you have to use iTunes and UPGRADE your iPhone to 1.1.2

That is it for PART 1 of the guide, there is still PART 2 but thats very easy and alot shorter than this. Once I finish up PART 2, I will post it up here.

GOOD LUCK EVERYONE

PART 2

Step 1: Connect your iPhone to your computer and open up iTunes. Ignore anything that iTunes has to say. DFU Restore to 1.02. After this you will get an error 1013. Now DFU Restore AGAIN to 1.02, and you will again receive the same error which is perfectly normal.

Step 2: Close iTunes and run AppTappInstaller and select firmware 1.02, this will kick your iPhone out of Restore Mode. After you get an error from AppTappInstaller, your iPhone should now be at an Activation screen. You can now close AppTappInstaller.

Step 3: Open up iTunes and ignore anything it says. Now open up wiNstallerGUI.exe and hit the Activate button. Wait for this process to complete. You will know that its complete when your slider says “Slide to Unlock”, at this point, you can slide it and go to springboard.

Step 4: Close iTunes, and open up AppTappInstaller and select firmware 1.02 and wait for the program to finish installing everything. Once its done, you may close it. Now go into settings and set autolock to never, and also setup your wifi network.

Step 5: Return to your springboard, and go into Installer, it will notify you of a update. Update installer. After its complete, return to your springboard, and now go back into installer. Tap the sources button on the lower right corner, and tap edit, then add. Type in the following source, and double check to make sure its exact:

http://markmon.mine.nu:90/iphone/repo/repo.plist

EDIT by ReVan: OR use ModMyiFone.com source
http://modmyifone.com/installer.xml

Hit the refresh button a few times, the source name should now say BigBoss.

Step 6: Tap on the Install icon on the bottom, and scroll down to the Sources category. From there install Community Sources. After that scroll to the System category and install BSD Subsystems. After that, scroll to the Unlock that iPhone category and install Anysim 1.2, now hit the home button to return to your spring board.

Step 7: Now run anySIM from your springboard, after it finishes it should tell you that the unlock was successful.

Step 8: Go back into Installer and go to the Tweaks 1.1.1 category. Now find and install Oktoprep. Once its installed you should get a message saying something about you being ready for a touchless upgrade, blah blah blah…, just hit ok and exit installer by pressing the home button.

Step 9: Open up iTunes and let it recognize your iPhone. You might be asked if you would like to restore from an older back up, do not do this, and also DO NOT SYNC, just give your iPhone a name. Once you are at the screen which lets you choose Update or Restore, you are going to hit UPDATE.

Step 10: For this step you will need to have the latest version of Java installed on your computer, so go to www.java.com and install it. Once complete, run the windows.bat file that’s in the 1.1.2-jailbreak folder. This process will take anywhere from 3 – 10 minutes, so let it run and finish properly. During this process, your phone will reboot a few times, which is perfectly normal and means that the program is doing its thing right now.

Once this process is complete, you should slide the slider to unlock your phone and see your carrier next to the signal bars. And Congratulations on a fully unlocked and jailbroken 1.1.2 iPhone
-----------Reply--------- Không ăn nhậu gì đâu, đọc bài trên không khác gì các anh Việt Nam đã viết. Fix IMEI thì dễ còn Wifi thì...........nhậu cho nhanh. hehe
-----------Reply--------- Thật ra muốn sữa lỗi NO WIFI hay NO IMEI cũng không khó nhưng phải bảo đảm là máy k hư phần cứng thì mới hiệu quả.Kết nối IP vào Itune,sau đó nhấn vào RETORE không nhấn SHIFT ,sau khi retore xong dùng Ziphone...

Cách này dùng tạm thời thôi khi chưa có FW 1.1.4
-----------Reply--------- Cách này dùng tạm thời thôi khi chưa có FW 1.1.4 là sao hả Bác, bây giờ đã có FW 1.1.4 rồi thì làm sao vậy Bác ?

Sau khi retore xong dùng Ziphone...Rồi sao nữa vậy Bác ???????????????
phải dùng Ziphone loại nào ( 2.0 - 2.2 - 2.4 hay...? ) phải đánh dấu vào ô nào ?.... mong Bác chỉ rỏ hơn vì em hoặc một số người khác mới biết đi chập chửng nên cần sự dẩn dắt tận tình của Bác và các sư phụ.Rất mong được Bác và các sư phụ giúp đở, xin cám ơn rất nhiều.
-----------Reply--------- Trích:

Nguyên văn bởi eye19792000

Thật ra muốn sữa lỗi NO WIFI hay NO IMEI cũng không khó nhưng phải bảo đảm là máy k hư phần cứng thì mới hiệu quả.Kết nối IP vào Itune,sau đó nhấn vào RETORE không nhấn SHIFT ,sau khi retore xong dùng Ziphone...

Cách này dùng tạm thời thôi khi chưa có FW 1.1.4

Cách này dùng tạm thời thôi khi chưa có FW 1.1.4 là sao hả Bác, bây giờ đã có FW 1.1.4 rồi thì làm sao vậy Bác ?

Sau khi retore xong dùng Ziphone...Rồi sao nữa vậy Bác ???????????????
phải dùng Ziphone loại nào ( 2.0 - 2.2 - 2.4 hay...? ) phải đánh dấu vào ô nào ?.... mong Bác chỉ rỏ hơn vì em hoặc một số người khác mới biết đi chập chửng nên cần sự dẩn dắt tận tình của Bác và các sư phụ.Rất mong được Bác và các sư phụ giúp đở, xin cám ơn rất nhiều.

-----------Reply---------
-----------Reply---------
CongTroi.Com . source from search & tinhte.com